MIC Chinese Simplified Chinese Traditional English
Advanced Search

Home » Member Showroom

Product List (Total 45 Products)

1. Spring Bushings,Bimetal Bushing

Bimetal bushings is hosed on steel and sintered with CuPb10Sn10 as a lining layer, This type of bushes has the best performance within the range of Cu-Pb alloy construct red ...
Last Updated: 2009-12-15

2. Bush, Bimetal Bushing (JF-800/700)

Bimetal bushings is hosed on steel and sintered with CuPb10Sn10 as a lining layer, This type of bushes has the best performance within the range of Cu-Pb alloy construct red ...
Last Updated: 2009-12-15

3. Bimetal Bush,Motor Bearing

Bimetal Bushing is hosed on steel and sintered with CuPb10Sn10 as a lining layer. This type of bushes has the best performance within the range of Cu-Pb alloy construct red ...
Last Updated: 2009-12-15

4. Graphite Inlaid Bushings

These Solid Bushings use high grade metal alloys as their base material and have finely finished surface with holes in which a specially formulated solid lubricant is embedded. ...
Last Updated: 2009-12-15

5. Bimetal Bushes, Lead-Free Bushings

These bushings have the type of SF-1 sliding bearing, SF-1B bronze based bearing, SF-1P reciprocating motion bearing, SF-1S stainless steel bush, SF-1T hydraulic bush, SF-2X ...
Last Updated: 2009-12-14

6. Guide Bushes,Washer Free Bushing

This bushes is a kind of high strength cast bronze based material and on the surface of ehich is embedded with preformed solid lubricant...The bushings has both the virtues of the ...
Last Updated: 2009-12-14

7. Bi-Metal Bush, Bushing (FM1013)

This bushes is a kind of steel-lead bronze alloys based bearing, which is embedded with particular formulation of solid lubricants. Owing to the high strength, high load capacity ...
Last Updated: 2009-12-14

8. Hydraulic Bush, Bronze Bushing (FM1018)

The bushes of FU, the bronze powder is mold pressed under high pressure and than sintered under high temperature, and oil is soaked into the homogeneously spreaded tiny pores of ...
Last Updated: 2009-12-14

9. Blades, Cutter

The material of the knife blades is Steel 45#(S45C, 1045, C45) and stainless steel(216, 304, 305```) and others according to clients requests! Thickness: From 0.3 mm to ...
Last Updated: 2009-12-14

10. Blades, Cutters

The material of the knife blades is Steel 45#(S45C, 1045, C45) and stainless steel(216, 304, 305``` ) and others according to clients requests! Thickness: From 0.3 mm to ...
Last Updated: 2009-12-14